Material: EPDM or Silicone
Available in 11 sizes: designed for 0” to 28-1/2” (0-724mm) diameter pipes
Only colours available are Red, Grey, and Black
For the metal roofing industry
Fix-A-Flash Master Flash® was specially designed for an oversize hole cut in the roof area, but with a small pipe.
Made with black or grey EPDM rubber or available in high-temp Red silicone.
Pipe Range: 1/8” (3mm) up to 15” (381mm) pipes.
Base:19-1/2” (495mm)
5 PCS/BOX
Designed for applications on metal roofs with an extreme pitch.
Three compounds: Black & Gray EPDM rubber or High-Temp Red silicone.
Available in three sizes from 0” (0mm) up to 12” (304mm).
Extreme Angle Master Flash® base range is from 11” (279mm), 14-1/4” (362mm), to 16-3/4” (425mm).
For the metal roof industry
Specifically designed for retrofit roof vents with a pre-installed metal base
Available in EPDM rubber
The overall height is 1/4” (6mm) with A flexible aluminium base that allows the flashing to conform to any panel configuration and most roof pitches regardless of vent location.
Square or Rectangle: 4” to 12” (101 to 355mm)
Base: 24” (609mm)